SemiNex delivers SOAs with the highest gain and available saturation power
at infrared wavelengths. When necessary we will further optimize the design of
our InP SOA to meet our customers' specific optical and electrical performance needs.
Single waveguide or arrays are tested to meet customer and market performance demands.
Typical results and packaging options are shown.
Contact SemiNex for additional details or performance demands.
Semiconductor Optical Amplifier
High Gain SemiNex SOA
High Saturation Output Power
Curved or Tilted Waveguide and Array
13xx and 15xx nm
Custom Design and Waveguide available
Applications
FMCW LiDAR
Telecom & Data Center
Tunable Laser
Spectroscopy
Research
Features
High Gain
High Saturation Power
High Efficiency
Cost Effective
SOA Chips
| | Symbol | CHP-291 | CHP-305 | Units |
|---|
| Optical | | | | |
|---|
| Wavelength | λc | 1550 | 1550 | nm (±20) |
| Output Power@600mA | Pout | 225 | 350 | mW (±10%) |
| Aperture Width | AW | 4 | 4 | μm |
| Aperture Height | AH | 1 | 1 | μm |
| Spectral Width | δλ | 85 | 85 | nm @ 3dB |
| Gain @ Pin=10μW | G | 30 | 30 | dB |
| Beam Exit Angle | ΘEXT | 19.5 | 19.5 | degree |
| Noise Figure | NF | 6 | 6 | db |
| Polarization Extinction Ratio | PER | 18 | 18 | dB |
| Fast Axis Div. | Θ_perp | 30 | 30 | deg FWHM |
| Slow Axis Div. | Θ_parallel | 20 | 20 | deg FWHM |
| Front Facet Reflectivity | | <0.1% | <0.1% | |
| Rear Face Reflectivity | | <0.1% | <0.1% | |
| Waveguide | | Tilted Straight | Curved | |
| Electrical | | | | |
|---|
| Operating Voltage | Vop | 2 | 2 | V |
| Operating Current | Iop | 0.6 | 0.5 | A |
| Mechanical | | | | |
|---|
| Chip Length | CL | 1500 | 1500 | μm |
| Chip Width | W | 500 | 500 | μm |
| Weight | | 0.05 | 0.05 | g |
| Operating Temp.** | | -40 to 100 | -40 to 100 | °C |
| Storage Temp. | | -40 to 80 | -40 to 80 | °C |
**Specified operating conditions are based on 20°C heat sink temperature. High temperature operation will reduce performance and MTTF.
**Specified values are based on the P-side down configuration and rated at a constant heat sink temperature of 20°C.
Unless otherwise indicated all values are nominal.
All statements, technical information and recommendations related to the product herein are based upon information believed to be reliable
or accurate. The accuracy or completeness herein is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application.
SemiNex Corporation reserves the right to change at any time without notice the design, specification, deduction, fit or form of its described
herein, including withdrawal at any time of a product offered for sale herein. Users are encouraged to visit www.seminex.com for the latest
data. SemiNex Corporation makes no representations that the products herein are free from any intellectual property claims of others.
Please contact SemiNex for more information. � 2016 SemiNex Corporation
SemiNex Corporation ● 153 Andover St ● Danvers, MA 01923 ● 978-326-7700 ● Email: info@seminex.com ● www.seminex.com
Date Created: Apr 18 2024 1:00PM UTC